MarkLogic 10 Product Documentation
geo.bearing

geo.bearing(
   p1 as cts.point,
   p2 as cts.point,
   [options as String[]]
) as Number

Summary

Returns the true bearing in radians of the path from the first point to the second. An error is raised if the two points are the same.

Parameters

p1 The first point.

p2 The second point.

Parameters
p1	The first point.
p2	The second point.
options	Options for the operation. The default is (). Options include: "coordinate-system=`string`" Use the given coordinate system. Valid values are: wgs84 The WGS84 coordinate system. wgs84/double The WGS84 coordinate system at double precision. etrs89 The ETRS89 coordinate system. etrs89/double The ETRS89 coordinate system at double precision. raw The raw (unmapped) coordinate system. raw/double The raw coordinate system at double precision. "precision=value" Use the coordinate system at the given precision. Allowed values: `float` and `double`. "units=`value`" Unit of measure of the tolerance value. Valid values are `miles` (default), `km`, `feet`, `meters`. "tolerance=`distance`" Tolerance is the largest allowable variation in geometry calculations. If the distance between two points is less than tolerance, then the two points are considered equal. For the raw coordinate system, use the units of the coordinates. For geographic coordinate systems, use the units specified by the units option.

options

Options for the operation. The default is ().

Options include:

"coordinate-system=string"

Use the given coordinate system. Valid values are:

wgs84
The WGS84 coordinate system.

wgs84/double
The WGS84 coordinate system at double precision.

etrs89
The ETRS89 coordinate system.

etrs89/double
The ETRS89 coordinate system at double precision.

raw
The raw (unmapped) coordinate system.

raw/double
The raw coordinate system at double precision.

"precision=value"

Use the coordinate system at the given precision. Allowed values: float and double.

"units=value"

Unit of measure of the tolerance value. Valid values are miles (default), km, feet, meters.

"tolerance=distance"

Tolerance is the largest allowable variation in geometry calculations. If the distance between two points is less than tolerance, then the two points are considered equal. For the raw coordinate system, use the units of the coordinates. For geographic coordinate systems, use the units specified by the units option.

Usage Notes

The value of the precision option takes precedence over that implied by the governing coordinate system name, including the value of the coordinate-system option. For example, if the governing coordinate system is "wgs84/double" and the precision option is "float", then the operation uses single precision.

Tolerance reflects how accurate you believe the data is. Computing a bearing between two points that are effectively equal within the limits of data accuracy is likely to produce useless results: The tolerance parameter can be used to force an error in this situation. Effective tolerance may be limited by the limits of precision.

Example

const sf = cts.point(37, -122);
const ny = cts.point(40, -73);
geo.bearing(sf, ny);

=> 1.2212785952625

MarkLogic 10 Product Documentationgeo.bearing

Summary

Usage Notes

See Also

Example

MarkLogic 10 Product Documentation
geo.bearing