MarkLogic Server 11.0 Product Documentation

Content Processing Framework Guide — Chapter 4

Status

The status is defined by the Status Change Handling pipeline, and has the following possible values:

• created
• updated
• deleted
• active
• done

The Status Change Handling Pipeline and corresponding XQuery modules automatically handle status changes. Setting the status in your application code, especially on a document whose status is anything except done, can cause unexpected behavior; do not set the status in your application code.

On Success and On Failure

The on-success and on-failure part of the status transition defines the next state if the status transition is successful (in the case of success) and defines the next state if the status transition is not successful (in the case of failure). In each case, they reference an XQuery module that is called when the status transition succeeds or fails. If you do not specify an on-success or on-failure state, the document remains in its current state after the status transition success or failure.

Default Action

The default action references an XQuery module that is called if no other actions are activated. The status transition will execute the first of the following that occurs:

• The action whose condition in the status transition returns true or is absent.
• The default action for any transition for this status.
• The success-action.

Priority

The priority is used to determine which pipeline should be executed first in the event that there are multiple pipelines attached to a domain that act on the same status. Status transitions with a higher priority number execute before ones with a lower number. In the event of a tie (that is, if two priorities are the same number), it is indeterminate which one will execute first. For the pipelines supplied with MarkLogic Server, the order is set such that conversion executes first, then entity enrichment, then modular documents (xinclude), then alerting, and finally schema validation.

Execute

The execute part of the status transition runs the XQuery module referenced in the condition, and then runs the XQuery module referenced by the action if the condition returns true or if there is no condition specified. If there are multiple execute elements in a single status transition, you should design them so that at most one execute element has a condition that returns true. If multiple conditions return true, then the first one to return true has its action executed. The reason for this is that all of the XQuery modules execute in separate transactions, and it is non-deterministic which one will return first. Therefore, if you have multiple conditions that return true, either the first one will come first (in the case of a single pipeline) or you cannot guarantee which one will come first and execute its action (in the case of multiple pipelines).

If a condition fails (for example, throws an exception), the condition is handled as if it returns false.

Execute nodes for status transitions can also include options nodes. The options nodes are the same as the ones for state transitions, described in Execute.

State

The state is a string that is stored in a properties document. A state can be any valid URI. States are used by pipelines to begin a state transition. When the transition is complete, the pipeline specifies a new state for the document. The new state, in turn, is caught by another state transition, and so on until there are no state transitions for the new document state.

On Success and On Failure

The on-success and on-failure part of the state transition is where you specify the state to which the document is set if the state transition returns successfully (on-success) or if it fails (on-failure). If you do not specify an on-success or on-failure state, the document remains in its current state after the state transition success or failure, thereby completing processing for that document.

Default Action

The default action references an XQuery module that is called if no other actions are activated. The state transition will execute the first of the following that occurs:

• Any action whose condition in the state transition returns true or is absent.
• The default action for any transition for this state.
• The success-action.

You can use the default action to move a document to the next state if the processing you want to perform is the default action. The following is a sample state-transition node that contains a default action:

<state-transition>
  <annotation>
    Default action example
  </annotation>
  <state>http://marklogic.com/states/initial</state>
  <on-success>http://marklogic.com/states/collected</on-success>
  <on-failure>http://marklogic.com/states/error</on-failure>
  <priority>5000</priority>
  <default-action>
    <module>/pipeline/mypipes/default-action.xqy</module>
  </default-action>
 </state-transition>

If you want the move the state to one that is different from the state transition's on-success state, you can use the $override-state parameter to the cpf:success function in your default action XQuery module. You should move the state to a different state from the document's current state. An example of a module that does this is the /MarkLogic/cpf/actions/state-setting-action.xqy under the Modules directory.

Priority

The priority is used to determine which pipeline state should be executed first in the event that there are multiple pipelines states attached to a domain that act on the same state. State transitions with a higher priority number execute before ones with a lower number. In the event of a tie (that is, if two priorities are the same number), it is indeterminate which one will execute first. For the pipelines supplied with MarkLogic Server, the order is set such that conversion executes first, then entity enrichment, then modular documents (xinclude), then alerting, and finally schema validation.

Execute

The execute part of the state transition runs the XQuery module or XSLT stylesheet referenced in the condition, and then runs the XQuery module or XSLT stylesheet referenced by the action if the condition returns true or if there is no condition specified. If there are multiple execute elements in a single state transition, you should design them so that at most one execute element has a condition that returns true. If multiple conditions return true, then the first one to return true has its action executed. The reason for this is that all of the XQuery modules or XSLT stylesheets execute in separate transactions, and it is non-deterministic which one will return first. Therefore, if you have multiple conditions that return true, either the first one will come first (in the case of a single pipeline) or you cannot guarantee which one will come first and execute its action (in the case of multiple pipelines).

If a condition fails (for example, throws an exception), the condition is handled as if it returns false.

You can also include an options node, which allows you to pass an external variable and/or an options node to code in the action XQuery moduleor XSLT stylesheet. The options node should have the namespace of the action module, or the namespace of the options node called in the XQuery function (xdmp:tidy, for example). The following is a sample options node within a condition:

<condition>
   <module>/MarkLogic/cpf/actions/mimetype-condition.xqy</module>
   <options xmlns="/MarkLogic/cpf/actions/mimetype-condition.xqy">
      <mime-type>text/html</mime-type>
   </options>
</condition>

The pipeline passes the options node as an external variable ($cpf:options) to the module that tests for the condition (mimetypes-condition.xqy, in this sample).