MarkLogic Server 11.0 Product Documentation
geo:region-approximate

geo:region-approximate(
   $region as cts:region,
   $threshold as xs:double,
   [$options as xs:string*]
) as cts:region

Summary

This function returns a simplified approximation of the region, using the Douglas-Peucker algorithm.

Parameters

region A cts region.

threshold How close the approximation should be, in the units specified by the units option.

Parameters
region	A cts region.
threshold	How close the approximation should be, in the units specified by the `units` option.
options	Options include: "coordinate-system=value" Use the given coordinate system. Valid values are `wgs84`, `wgs84/double`, `etrs89`, `etrs89/double`, `raw` and `raw/double`. Defaults to the governing coordinating system. "precision=value" Use the coordinate system at the given precision. Allowed values: `float` and `double`. Defaults to the precision of the governing coordinate system. "units=value" Measure distance, radii of circles, and tolerance in the specified units. Allowed values: `miles` (default), `km`, `feet`, `meters`. "tolerance=distance" Tolerance is the largest allowable variation in geometry calculations. If the distance between two points is less than tolerance, then the two points are considered equal. For the raw coordinate system, use the units of the coordinates. For geographic coordinate systems, use the units specified by the units option. Tolerance must be smaller than the value of the `threshold` parameter.

options

Options include:

"coordinate-system=value"

Use the given coordinate system. Valid values are wgs84, wgs84/double, etrs89, etrs89/double, raw and raw/double. Defaults to the governing coordinating system.

"precision=value"

Use the coordinate system at the given precision. Allowed values: float and double. Defaults to the precision of the governing coordinate system.

"units=value"

Measure distance, radii of circles, and tolerance in the specified units. Allowed values: miles (default), km, feet, meters.

"tolerance=distance"

Tolerance is the largest allowable variation in geometry calculations. If the distance between two points is less than tolerance, then the two points are considered equal. For the raw coordinate system, use the units of the coordinates. For geographic coordinate systems, use the units specified by the units option. Tolerance must be smaller than the value of the threshold parameter.

Usage Notes

Tolerance must be smaller than the threshold.

The value of the precision option takes precedence over that implied by the governing coordinate system name, including the value of the coordinate-system option. For example, if the governing coordinate system is "wgs84/double" and the precision option is "float", then the operation uses single precision.

Example

geo:region-approximate(
  cts:polygon((
    cts:point(0,0),
    cts:point(4,0),
    cts:point(2,10),
    cts:point(2,14),
    cts:point(2,11),
    cts:point(0,4),
    cts:point(0,0))), 400, ("tolerance=1"))

 => A cts:region with the coorindates 0,0 2,14 2,11 0,0

MarkLogic Server 11.0 Product Documentationgeo:region-approximate

Summary

Usage Notes

See Also

Example

MarkLogic Server 11.0 Product Documentation
geo:region-approximate