public interface GeoExpr
Modifier and Type  Method and Description 

ServerExpression 
approxCenter(ServerExpression region)
Return a point approximating the center of the
given region.

ServerExpression 
approxCenter(ServerExpression region,
ServerExpression options)
Return a point approximating the center of the
given region.

ServerExpression 
approxCenter(ServerExpression region,
java.lang.String options)
Return a point approximating the center of the
given region.

ServerExpression 
arcIntersection(ServerExpression p1,
ServerExpression p2,
ServerExpression q1,
ServerExpression q2)
Returns the point at the intersection of two
arcs.

ServerExpression 
arcIntersection(ServerExpression p1,
ServerExpression p2,
ServerExpression q1,
ServerExpression q2,
ServerExpression options)
Returns the point at the intersection of two
arcs.

ServerExpression 
arcIntersection(ServerExpression p1,
ServerExpression p2,
ServerExpression q1,
ServerExpression q2,
java.lang.String options)
Returns the point at the intersection of two
arcs.

ServerExpression 
bearing(ServerExpression p1,
ServerExpression p2)
Returns the true bearing in radians of the path
from the first point to the second.

ServerExpression 
bearing(ServerExpression p1,
ServerExpression p2,
ServerExpression options)
Returns the true bearing in radians of the path
from the first point to the second.

ServerExpression 
bearing(ServerExpression p1,
ServerExpression p2,
java.lang.String options)
Returns the true bearing in radians of the path
from the first point to the second.

ServerExpression 
boundingBoxes(ServerExpression region)
Returns a sequence of boxes that bound the given
region.

ServerExpression 
boundingBoxes(ServerExpression region,
ServerExpression options)
Returns a sequence of boxes that bound the given
region.

ServerExpression 
boundingBoxes(ServerExpression region,
java.lang.String options)
Returns a sequence of boxes that bound the given
region.

ServerExpression 
boxIntersects(ServerExpression box,
ServerExpression region)
Returns true if the box intersects with a
region.

ServerExpression 
boxIntersects(ServerExpression box,
ServerExpression region,
ServerExpression options)
Returns true if the box intersects with a
region.

ServerExpression 
boxIntersects(ServerExpression box,
ServerExpression region,
java.lang.String options)
Returns true if the box intersects with a
region.

ServerExpression 
circleIntersects(ServerExpression circle,
ServerExpression region)
Returns true if the circle intersects with a
region.

ServerExpression 
circleIntersects(ServerExpression circle,
ServerExpression region,
ServerExpression options)
Returns true if the circle intersects with a
region.

ServerExpression 
circleIntersects(ServerExpression circle,
ServerExpression region,
java.lang.String options)
Returns true if the circle intersects with a
region.

ServerExpression 
circlePolygon(ServerExpression circle,
double arcTolerance)
Construct a polygon approximating a
circle.

ServerExpression 
circlePolygon(ServerExpression circle,
double arcTolerance, java.lang.String options)
Construct a polygon approximating a
circle.

ServerExpression 
circlePolygon(ServerExpression circle,
ServerExpression arcTolerance)
Construct a polygon approximating a
circle.

ServerExpression 
circlePolygon(ServerExpression circle,
ServerExpression arcTolerance,
ServerExpression options)
Construct a polygon approximating a
circle.

ServerExpression 
contains(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'contains' DE9IM relation.

ServerExpression 
contains(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'contains' DE9IM relation.

ServerExpression 
contains(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'contains' DE9IM relation.

ServerExpression 
countDistinctVertices(ServerExpression region)
Return a count of the distinct number of
vertices in a region, taking tolerance into account.

ServerExpression 
countDistinctVertices(ServerExpression region,
ServerExpression options)
Return a count of the distinct number of
vertices in a region, taking tolerance into account.

ServerExpression 
countDistinctVertices(ServerExpression region,
java.lang.String options)
Return a count of the distinct number of
vertices in a region, taking tolerance into account.

ServerExpression 
countVertices(ServerExpression region)
This function returns a count of the number of
vertices in a region.

ServerExpression 
coveredBy(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'covered by' DE9IM relation.

ServerExpression 
coveredBy(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'covered by' DE9IM relation.

ServerExpression 
coveredBy(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'covered by' DE9IM relation.

ServerExpression 
covers(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'covers' DE9IM relation.

ServerExpression 
covers(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'covers' DE9IM relation.

ServerExpression 
covers(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'covers' DE9IM relation.

ServerExpression 
crosses(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'crosses' DE9IM relation.

ServerExpression 
crosses(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'crosses' DE9IM relation.

ServerExpression 
crosses(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'crosses' DE9IM relation.

ServerExpression 
destination(ServerExpression p,
double bearing, double distance)
Returns the point at the given distance (in
units) along the given bearing (in radians) from the starting
point.

ServerExpression 
destination(ServerExpression p,
double bearing, double distance,
java.lang.String options)
Returns the point at the given distance (in
units) along the given bearing (in radians) from the starting
point.

ServerExpression 
destination(ServerExpression p,
ServerExpression bearing,
ServerExpression distance)
Returns the point at the given distance (in
units) along the given bearing (in radians) from the starting
point.

ServerExpression 
destination(ServerExpression p,
ServerExpression bearing,
ServerExpression distance,
ServerExpression options)
Returns the point at the given distance (in
units) along the given bearing (in radians) from the starting
point.

ServerExpression 
disjoint(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'disjoint' DE9IM relation.

ServerExpression 
disjoint(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'disjoint' DE9IM relation.

ServerExpression 
disjoint(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'disjoint' DE9IM relation.

ServerExpression 
distance(ServerExpression p1,
ServerExpression p2)
Returns the distance (in units) between two
points.

ServerExpression 
distance(ServerExpression p1,
ServerExpression p2,
ServerExpression options)
Returns the distance (in units) between two
points.

ServerExpression 
distance(ServerExpression p1,
ServerExpression p2,
java.lang.String options)
Returns the distance (in units) between two
points.

ServerExpression 
distanceConvert(ServerExpression distance,
ServerExpression unit1,
ServerExpression unit2)
This function converts a distance from one unit
of measure to another.

ServerExpression 
distanceConvert(ServerExpression distance,
java.lang.String unit1, java.lang.String unit2)
This function converts a distance from one unit
of measure to another.

ServerExpression 
ellipsePolygon(ServerExpression center,
double semiMajorAxis, double semiMinorAxis,
double azimuth, double arcTolerance)
Construct a polygon approximating an
ellipse.

ServerExpression 
ellipsePolygon(ServerExpression center,
double semiMajorAxis, double semiMinorAxis,
double azimuth, double arcTolerance,
java.lang.String options)
Construct a polygon approximating an
ellipse.

ServerExpression 
ellipsePolygon(ServerExpression center,
ServerExpression semiMajorAxis,
ServerExpression semiMinorAxis,
ServerExpression azimuth,
ServerExpression arcTolerance)
Construct a polygon approximating an
ellipse.

ServerExpression 
ellipsePolygon(ServerExpression center,
ServerExpression semiMajorAxis,
ServerExpression semiMinorAxis,
ServerExpression azimuth,
ServerExpression arcTolerance,
ServerExpression options)
Construct a polygon approximating an
ellipse.

ServerExpression 
equals(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'equals' DE9IM relation.

ServerExpression 
equals(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'equals' DE9IM relation.

ServerExpression 
equals(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'equals' DE9IM relation.

ServerExpression 
geohashDecode(ServerExpression hash)
Given a geohash string, return the bounding box
for that hash.

ServerExpression 
geohashDecode(java.lang.String hash)
Given a geohash string, return the bounding box
for that hash.

ServerExpression 
geohashDecodePoint(ServerExpression hash)
Given a geohash string, return the point for
that hash.

ServerExpression 
geohashDecodePoint(java.lang.String hash)
Given a geohash string, return the point for
that hash.

ServerExpression 
geohashEncode(ServerExpression region)
Compute a set of covering geohashes for the
given region, to the given level of precision.

ServerExpression 
geohashEncode(ServerExpression region,
long geohashPrecision)
Compute a set of covering geohashes for the
given region, to the given level of precision.

ServerExpression 
geohashEncode(ServerExpression region,
long geohashPrecision, java.lang.String options)
Compute a set of covering geohashes for the
given region, to the given level of precision.

ServerExpression 
geohashEncode(ServerExpression region,
ServerExpression geohashPrecision)
Compute a set of covering geohashes for the
given region, to the given level of precision.

ServerExpression 
geohashEncode(ServerExpression region,
ServerExpression geohashPrecision,
ServerExpression options)
Compute a set of covering geohashes for the
given region, to the given level of precision.

ServerExpression 
geohashNeighbors(ServerExpression hash)
Given a geohash string, return hashes for the
neighbors.

ServerExpression 
geohashPrecisionDimensions(ServerExpression precision)
Given a geohash string, return the height and
width for the given precision.

ServerExpression 
geohashSubhashes(ServerExpression hash)
Given a geohash string, return the 32
subhashes.

ServerExpression 
geohashSubhashes(ServerExpression hash,
ServerExpression which)
Given a geohash string, return the 32
subhashes.

ServerExpression 
geohashSubhashes(ServerExpression hash,
java.lang.String which)
Given a geohash string, return the 32
subhashes.

ServerExpression 
interiorPoint(ServerExpression region)
This function returns a point that is guaranteed
to be inside the bounds of the given region.

ServerExpression 
interiorPoint(ServerExpression region,
ServerExpression options)
This function returns a point that is guaranteed
to be inside the bounds of the given region.

ServerExpression 
interiorPoint(ServerExpression region,
java.lang.String options)
This function returns a point that is guaranteed
to be inside the bounds of the given region.

ServerExpression 
intersects(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'intersects' DE9IM relation.

ServerExpression 
intersects(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'intersects' DE9IM relation.

ServerExpression 
intersects(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'intersects' DE9IM relation.

ServerExpression 
overlaps(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'overlaps' DE9IM relation.

ServerExpression 
overlaps(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'overlaps' DE9IM relation.

ServerExpression 
overlaps(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'overlaps' DE9IM relation.

CtsRegionSeqExpr 
parseWkt(ServerExpression wkt)
Returns a sequence of geospatial regions parsed
from WellKnown Text format.

CtsRegionSeqExpr 
parseWkt(java.lang.String wkt)
Returns a sequence of geospatial regions parsed
from WellKnown Text format.

CtsRegionExpr 
regionApproximate(ServerExpression region,
double threshold)
This function returns a simplified approximation
of the region, using the DouglasPeucker algorithm.

CtsRegionExpr 
regionApproximate(ServerExpression region,
double threshold, java.lang.String options)
This function returns a simplified approximation
of the region, using the DouglasPeucker algorithm.

CtsRegionExpr 
regionApproximate(ServerExpression region,
ServerExpression threshold)
This function returns a simplified approximation
of the region, using the DouglasPeucker algorithm.

CtsRegionExpr 
regionApproximate(ServerExpression region,
ServerExpression threshold,
ServerExpression options)
This function returns a simplified approximation
of the region, using the DouglasPeucker algorithm.

CtsRegionExpr 
regionClean(ServerExpression region)
This function fixes various problems with the
region or raises an error if it is not repairable.

CtsRegionExpr 
regionClean(ServerExpression region,
ServerExpression options)
This function fixes various problems with the
region or raises an error if it is not repairable.

CtsRegionExpr 
regionClean(ServerExpression region,
java.lang.String options)
This function fixes various problems with the
region or raises an error if it is not repairable.

ServerExpression 
regionContains(ServerExpression target,
ServerExpression region)
Returns true if one region contains the other
region.

ServerExpression 
regionContains(ServerExpression target,
ServerExpression region,
ServerExpression options)
Returns true if one region contains the other
region.

ServerExpression 
regionContains(ServerExpression target,
ServerExpression region,
java.lang.String options)
Returns true if one region contains the other
region.

ServerExpression 
regionDe9im(ServerExpression region1,
ServerExpression region2)
Calculates the Dimensionally Extended
nineIntersection Matrix (DE9IM) of two geospatial regions.

ServerExpression 
regionDe9im(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Calculates the Dimensionally Extended
nineIntersection Matrix (DE9IM) of two geospatial regions.

ServerExpression 
regionDe9im(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Calculates the Dimensionally Extended
nineIntersection Matrix (DE9IM) of two geospatial regions.

ServerExpression 
regionIntersects(ServerExpression target,
ServerExpression region)
Returns true if the target region intersects
with a region.

ServerExpression 
regionIntersects(ServerExpression target,
ServerExpression region,
ServerExpression options)
Returns true if the target region intersects
with a region.

ServerExpression 
regionIntersects(ServerExpression target,
ServerExpression region,
java.lang.String options)
Returns true if the target region intersects
with a region.

ServerExpression 
regionRelate(ServerExpression region1,
ServerExpression operation,
ServerExpression region2)
Compares geospatial regions based on a specified
relationship.

ServerExpression 
regionRelate(ServerExpression region1,
ServerExpression operation,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions based on a specified
relationship.

ServerExpression 
regionRelate(ServerExpression region1,
java.lang.String operation, ServerExpression region2)
Compares geospatial regions based on a specified
relationship.

ServerExpression 
regionRelate(ServerExpression region1,
java.lang.String operation, ServerExpression region2,
java.lang.String options)
Compares geospatial regions based on a specified
relationship.

CtsRegionExpr 
removeDuplicateVertices(ServerExpression region)
Remove duplicate (adjacent) vertices.

CtsRegionExpr 
removeDuplicateVertices(ServerExpression region,
ServerExpression options)
Remove duplicate (adjacent) vertices.

CtsRegionExpr 
removeDuplicateVertices(ServerExpression region,
java.lang.String options)
Remove duplicate (adjacent) vertices.

ServerExpression 
shortestDistance(ServerExpression p1,
ServerExpression region)
Returns the great circle distance (in units)
between a point and a region.

ServerExpression 
shortestDistance(ServerExpression p1,
ServerExpression region,
ServerExpression options)
Returns the great circle distance (in units)
between a point and a region.

ServerExpression 
shortestDistance(ServerExpression p1,
ServerExpression region,
java.lang.String options)
Returns the great circle distance (in units)
between a point and a region.

ServerExpression 
touches(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'touches' DE9IM relation.

ServerExpression 
touches(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'touches' DE9IM relation.

ServerExpression 
touches(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'touches' DE9IM relation.

ServerExpression 
toWkt(ServerExpression wkt)
Returns a sequence of strings in WellKnown Text
format.

ServerExpression 
validateWkt(ServerExpression wkt)
Returns true if the string is valid WellKnown
Text for a supported region type.

ServerExpression 
within(ServerExpression region1,
ServerExpression region2)
Compares geospatial regions to see if they
fulfill the 'within' DE9IM relation.

ServerExpression 
within(ServerExpression region1,
ServerExpression region2,
ServerExpression options)
Compares geospatial regions to see if they
fulfill the 'within' DE9IM relation.

ServerExpression 
within(ServerExpression region1,
ServerExpression region2,
java.lang.String options)
Compares geospatial regions to see if they
fulfill the 'within' DE9IM relation.

ServerExpression approxCenter(ServerExpression region)
Provides a client interface to the geo:approxcenter server function.
region
 A geospatial region. (of cts:region)ServerExpression approxCenter(ServerExpression region, java.lang.String options)
Provides a client interface to the geo:approxcenter server function.
region
 A geospatial region. (of cts:region)options
 Options. The default is (). Options
include: "boxpercent=n" An integer between 0 and 100 (default is
100) that indicates what percentage of a polygon's bounding box
slivers should be used in constructing the approximate centroid.
Lower numbers use fewer slivers, giving faster but less accurate
results; larger numbers use more slivers, giving slower but more
accurate results. "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" The precision use for this operation, including
the interpretation of input values. Allowed values: float, double.
Default: The precision of the governing coordinate system. (of
xs:string)ServerExpression approxCenter(ServerExpression region, ServerExpression options)
Provides a client interface to the geo:approxcenter server function.
region
 A geospatial region. (of cts:region)options
 Options. The default is (). Options
include: "boxpercent=n" An integer between 0 and 100 (default is
100) that indicates what percentage of a polygon's bounding box
slivers should be used in constructing the approximate centroid.
Lower numbers use fewer slivers, giving faster but less accurate
results; larger numbers use more slivers, giving slower but more
accurate results. "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" The precision use for this operation, including
the interpretation of input values. Allowed values: float, double.
Default: The precision of the governing coordinate system. (of
xs:string)ServerExpression arcIntersection(ServerExpression p1, ServerExpression p2, ServerExpression q1, ServerExpression q2)
Provides a client interface to the geo:arcintersection server function.
p1
 The starting point of the first arc. (of
cts:point)p2
 The ending point of the first arc. (of
cts:point)q1
 The starting point of the second arc. (of
cts:point)q2
 The ending point of the second arc. (of
cts:point)ServerExpression arcIntersection(ServerExpression p1, ServerExpression p2, ServerExpression q1, ServerExpression q2, java.lang.String options)
Provides a client interface to the geo:arcintersection server function.
p1
 The starting point of the first arc. (of
cts:point)p2
 The ending point of the first arc. (of
cts:point)q1
 The starting point of the second arc. (of
cts:point)q2
 The ending point of the second arc. (of
cts:point)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance
and the radii of circles in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. (of xs:string)ServerExpression arcIntersection(ServerExpression p1, ServerExpression p2, ServerExpression q1, ServerExpression q2, ServerExpression options)
Provides a client interface to the geo:arcintersection server function.
p1
 The starting point of the first arc. (of
cts:point)p2
 The ending point of the first arc. (of
cts:point)q1
 The starting point of the second arc. (of
cts:point)q2
 The ending point of the second arc. (of
cts:point)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance
and the radii of circles in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. (of xs:string)ServerExpression bearing(ServerExpression p1, ServerExpression p2)
Provides a client interface to the geo:bearing server function.
ServerExpression bearing(ServerExpression p1, ServerExpression p2, java.lang.String options)
Provides a client interface to the geo:bearing server function.
p1
 The first point. (of cts:point)p2
 The second point. (of cts:point)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Unit of measure of
the tolerance value. Valid values are miles (default), km, feet,
meters. "tolerance=distance" Tolerance is the largest allowable
variation in geometry calculations. If the distance between two
points is less than tolerance, then the two points are considered
equal. For the raw coordinate system, use the units of the
coordinates. For geographic coordinate systems, use the units
specified by the units option. (of xs:string)ServerExpression bearing(ServerExpression p1, ServerExpression p2, ServerExpression options)
Provides a client interface to the geo:bearing server function.
p1
 The first point. (of cts:point)p2
 The second point. (of cts:point)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Unit of measure of
the tolerance value. Valid values are miles (default), km, feet,
meters. "tolerance=distance" Tolerance is the largest allowable
variation in geometry calculations. If the distance between two
points is less than tolerance, then the two points are considered
equal. For the raw coordinate system, use the units of the
coordinates. For geographic coordinate systems, use the units
specified by the units option. (of xs:string)ServerExpression boundingBoxes(ServerExpression region)
Provides a client interface to the geo:boundingboxes server function.
region
 A geographic region (box, circle,
polygon, or point). (of cts:region)ServerExpression boundingBoxes(ServerExpression region, java.lang.String options)
Provides a client interface to the geo:boundingboxes server function.
region
 A geographic region (box, circle,
polygon, or point). (of cts:region)options
 Options for the operation. The default
is (). Options include: Options include: "coordinatesystem=string"
Use the given coordinate system. Valid values are: wgs84The WGS84
coordinate system with degrees as the angular unit.
wgs84/radiansThe WGS84 coordinate system with radians as the
angular unit. wgs84/doubleThe WGS84 coordinate system at double
precision with degrees as the angular unit. wgs84/radians/doubleThe
WGS84 coordinate system at double precision with radians as the
angular unit. etrs89The ETRS89 coordinate system. etrs89/doubleThe
ETRS89 coordinate system at double precision. rawThe raw (unmapped)
coordinate system. raw/doubleThe raw coordinate system at double
precision. "precision=value" Use the coordinate system at the given
precision. Allowed values: float and double. "units=value" Measure
distance, radii of circles, and tolerance in the specified units.
Allowed values: miles (default), km, feet, meters. "boxpercent=n"
An integer between 0 and 100 (default is 100) that indicates what
percentage of a polygon's bounding box slivers should be returned.
Lower numbers give fewer, less accurate boxes; larger numbers give
more, more accurate boxes. "tolerance=distance" Tolerance is the
largest allowable variation in geometry calculations. The bounding
boxes will be padded to cover any points within tolerance of the
region. For the raw coordinate system, use the units of the
coordinates. For geographic coordinate systems, use the units
specified by the units option. The default value is 0 (no padding).
"boundariesincluded" Points on boxes', circles', and polygons'
boundaries are counted as matching. This is the default.
"boundariesexcluded" Points on boxes', circles', and polygons'
boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression boundingBoxes(ServerExpression region, ServerExpression options)
Provides a client interface to the geo:boundingboxes server function.
region
 A geographic region (box, circle,
polygon, or point). (of cts:region)options
 Options for the operation. The default
is (). Options include: Options include: "coordinatesystem=string"
Use the given coordinate system. Valid values are: wgs84The WGS84
coordinate system with degrees as the angular unit.
wgs84/radiansThe WGS84 coordinate system with radians as the
angular unit. wgs84/doubleThe WGS84 coordinate system at double
precision with degrees as the angular unit. wgs84/radians/doubleThe
WGS84 coordinate system at double precision with radians as the
angular unit. etrs89The ETRS89 coordinate system. etrs89/doubleThe
ETRS89 coordinate system at double precision. rawThe raw (unmapped)
coordinate system. raw/doubleThe raw coordinate system at double
precision. "precision=value" Use the coordinate system at the given
precision. Allowed values: float and double. "units=value" Measure
distance, radii of circles, and tolerance in the specified units.
Allowed values: miles (default), km, feet, meters. "boxpercent=n"
An integer between 0 and 100 (default is 100) that indicates what
percentage of a polygon's bounding box slivers should be returned.
Lower numbers give fewer, less accurate boxes; larger numbers give
more, more accurate boxes. "tolerance=distance" Tolerance is the
largest allowable variation in geometry calculations. The bounding
boxes will be padded to cover any points within tolerance of the
region. For the raw coordinate system, use the units of the
coordinates. For geographic coordinate systems, use the units
specified by the units option. The default value is 0 (no padding).
"boundariesincluded" Points on boxes', circles', and polygons'
boundaries are counted as matching. This is the default.
"boundariesexcluded" Points on boxes', circles', and polygons'
boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression boxIntersects(ServerExpression box, ServerExpression region)
Provides a client interface to the geo:boxintersects server function.
box
 A geographic box. (of cts:box)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if any region intersects the box. (of
cts:region)ServerExpression boxIntersects(ServerExpression box, ServerExpression region, java.lang.String options)
Provides a client interface to the geo:boxintersects server function.
box
 A geographic box. (of cts:box)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if any region intersects the box. (of
cts:region)options
 Options for the operation. The default
is (). Options include: Options include: "coordinatesystem=string"
Use the given coordinate system. Valid values are: wgs84The WGS84
coordinate system with degrees as the angular unit.
wgs84/radiansThe WGS84 coordinate system with radians as the
angular unit. wgs84/doubleThe WGS84 coordinate system at double
precision with degrees as the angular unit. wgs84/radians/doubleThe
WGS84 coordinate system at double precision with radians as the
angular unit. etrs89The ETRS89 coordinate system. etrs89/doubleThe
ETRS89 coordinate system at double precision. rawThe raw (unmapped)
coordinate system. raw/doubleThe raw coordinate system at double
precision. "precision=value" Use the coordinate system at the given
precision. Allowed values: float and double. "units=value" Measure
distance, radii of circles, and tolerance in the specified units.
Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. "boundariesincluded" Points on boxes', circles', and
polygons' boundaries are counted as matching. This is the default.
"boundariesexcluded" Points on boxes', circles', and polygons'
boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression boxIntersects(ServerExpression box, ServerExpression region, ServerExpression options)
Provides a client interface to the geo:boxintersects server function.
box
 A geographic box. (of cts:box)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if any region intersects the box. (of
cts:region)options
 Options for the operation. The default
is (). Options include: Options include: "coordinatesystem=string"
Use the given coordinate system. Valid values are: wgs84The WGS84
coordinate system with degrees as the angular unit.
wgs84/radiansThe WGS84 coordinate system with radians as the
angular unit. wgs84/doubleThe WGS84 coordinate system at double
precision with degrees as the angular unit. wgs84/radians/doubleThe
WGS84 coordinate system at double precision with radians as the
angular unit. etrs89The ETRS89 coordinate system. etrs89/doubleThe
ETRS89 coordinate system at double precision. rawThe raw (unmapped)
coordinate system. raw/doubleThe raw coordinate system at double
precision. "precision=value" Use the coordinate system at the given
precision. Allowed values: float and double. "units=value" Measure
distance, radii of circles, and tolerance in the specified units.
Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. "boundariesincluded" Points on boxes', circles', and
polygons' boundaries are counted as matching. This is the default.
"boundariesexcluded" Points on boxes', circles', and polygons'
boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression circleIntersects(ServerExpression circle, ServerExpression region)
Provides a client interface to the geo:circleintersects server function.
circle
 A geographic circle. (of cts:circle)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if any region intersects the target circle.
(of cts:region)ServerExpression circleIntersects(ServerExpression circle, ServerExpression region, java.lang.String options)
Provides a client interface to the geo:circleintersects server function.
circle
 A geographic circle. (of cts:circle)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if any region intersects the target circle.
(of cts:region)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
"boundariesincluded" Points on boxes', circles', and polygons'
boundaries are counted as matching. This is the default.
"boundariesexcluded" Points on boxes', circles', and polygons'
boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression circleIntersects(ServerExpression circle, ServerExpression region, ServerExpression options)
Provides a client interface to the geo:circleintersects server function.
circle
 A geographic circle. (of cts:circle)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if any region intersects the target circle.
(of cts:region)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
"boundariesincluded" Points on boxes', circles', and polygons'
boundaries are counted as matching. This is the default.
"boundariesexcluded" Points on boxes', circles', and polygons'
boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression circlePolygon(ServerExpression circle, double arcTolerance)
Provides a client interface to the geo:circlepolygon server function.
circle
 A cts circle that defines the circle to
be approximated. (of cts:circle)arcTolerance
 How far the approximation can be
from the actual circle, specified in the same units as the units
option. Arctolerance should be greater than the value of the
tolerance option. (of xs:double)ServerExpression circlePolygon(ServerExpression circle, ServerExpression arcTolerance)
Provides a client interface to the geo:circlepolygon server function.
circle
 A cts circle that defines the circle to
be approximated. (of cts:circle)arcTolerance
 How far the approximation can be
from the actual circle, specified in the same units as the units
option. Arctolerance should be greater than the value of the
tolerance option. (of xs:double)ServerExpression circlePolygon(ServerExpression circle, double arcTolerance, java.lang.String options)
Provides a client interface to the geo:circlepolygon server function.
circle
 A cts circle that defines the circle to
be approximated. (of cts:circle)arcTolerance
 How far the approximation can be
from the actual circle, specified in the same units as the units
option. Arctolerance should be greater than the value of the
tolerance option. (of xs:double)options
 Options with which you can customize
this operation. The following options are available:
"coordinatesystem=value" Use the given coordinate system. Valid
values are wgs84, wgs84/double, etrs89, etrs89/double, raw and
raw/double. Defaults to the governing coordinating system.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. Defaults to the precision of the
governing coordinate system. "units=value" Measure distance, radii
of circles, and tolerance in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. Tolerance should be
smaller than the value of the arctolerance parameter. (of xs:string)ServerExpression circlePolygon(ServerExpression circle, ServerExpression arcTolerance, ServerExpression options)
Provides a client interface to the geo:circlepolygon server function.
circle
 A cts circle that defines the circle to
be approximated. (of cts:circle)arcTolerance
 How far the approximation can be
from the actual circle, specified in the same units as the units
option. Arctolerance should be greater than the value of the
tolerance option. (of xs:double)options
 Options with which you can customize
this operation. The following options are available:
"coordinatesystem=value" Use the given coordinate system. Valid
values are wgs84, wgs84/double, etrs89, etrs89/double, raw and
raw/double. Defaults to the governing coordinating system.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. Defaults to the precision of the
governing coordinate system. "units=value" Measure distance, radii
of circles, and tolerance in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. Tolerance should be
smaller than the value of the arctolerance parameter. (of xs:string)ServerExpression contains(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:contains server function.
region1
 The first geospatial region to compare.
This region is the left operand of contains. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of contains. (of cts:region)ServerExpression contains(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:contains server function.
region1
 The first geospatial region to compare.
This region is the left operand of contains. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of contains. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression contains(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:contains server function.
region1
 The first geospatial region to compare.
This region is the left operand of contains. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of contains. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression countDistinctVertices(ServerExpression region)
Provides a client interface to the geo:countdistinctvertices server function.
region
 A cts region. (of cts:region)ServerExpression countDistinctVertices(ServerExpression region, java.lang.String options)
Provides a client interface to the geo:countdistinctvertices server function.
region
 A cts region. (of cts:region)options
 Options include:
"coordinatesystem=value" Use the given coordinate system. Valid
values are wgs84, wgs84/double, etrs89, etrs89/double, raw and
raw/double. Defaults to the governing coordinating system.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. Defaults to the precision of the
governing coordinate system. "units=value" Measure distance, radii
of circles, and tolerance in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. (of xs:string)ServerExpression countDistinctVertices(ServerExpression region, ServerExpression options)
Provides a client interface to the geo:countdistinctvertices server function.
region
 A cts region. (of cts:region)options
 Options include:
"coordinatesystem=value" Use the given coordinate system. Valid
values are wgs84, wgs84/double, etrs89, etrs89/double, raw and
raw/double. Defaults to the governing coordinating system.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. Defaults to the precision of the
governing coordinate system. "units=value" Measure distance, radii
of circles, and tolerance in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. (of xs:string)ServerExpression countVertices(ServerExpression region)
Provides a client interface to the geo:countvertices server function.
region
 A cts region. (of cts:region)ServerExpression coveredBy(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:coveredby server function.
region1
 The first geospatial region to compare.
This region is the left operand of coveredby. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of coveredby. (of cts:region)ServerExpression coveredBy(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:coveredby server function.
region1
 The first geospatial region to compare.
This region is the left operand of coveredby. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of coveredby. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression coveredBy(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:coveredby server function.
region1
 The first geospatial region to compare.
This region is the left operand of coveredby. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of coveredby. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression covers(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:covers server function.
region1
 The first geospatial region to compare.
This region is the left operand of covers. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of covers. (of cts:region)ServerExpression covers(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:covers server function.
region1
 The first geospatial region to compare.
This region is the left operand of covers. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of covers. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression covers(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:covers server function.
region1
 The first geospatial region to compare.
This region is the left operand of covers. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of covers. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression crosses(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:crosses server function.
region1
 The first geospatial region to compare.
This region is the left operand of crosses. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of crosses. (of cts:region)ServerExpression crosses(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:crosses server function.
region1
 The first geospatial region to compare.
This region is the left operand of crosses. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of crosses. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression crosses(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:crosses server function.
region1
 The first geospatial region to compare.
This region is the left operand of crosses. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of crosses. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression destination(ServerExpression p, double bearing, double distance)
Provides a client interface to the geo:destination server function.
ServerExpression destination(ServerExpression p, ServerExpression bearing, ServerExpression distance)
Provides a client interface to the geo:destination server function.
ServerExpression destination(ServerExpression p, double bearing, double distance, java.lang.String options)
Provides a client interface to the geo:destination server function.
p
 The starting point. (of cts:point)bearing
 The bearing, in radians. (of xs:double)distance
 The distance, in units. See the units
option, below. (of xs:double)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance
and the radii of circles in the specified units. Allowed values:
miles (default), km, feet, meters. (of xs:string)ServerExpression destination(ServerExpression p, ServerExpression bearing, ServerExpression distance, ServerExpression options)
Provides a client interface to the geo:destination server function.
p
 The starting point. (of cts:point)bearing
 The bearing, in radians. (of xs:double)distance
 The distance, in units. See the units
option, below. (of xs:double)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance
and the radii of circles in the specified units. Allowed values:
miles (default), km, feet, meters. (of xs:string)ServerExpression disjoint(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:disjoint server function.
region1
 The first geospatial region to compare.
This region is the left operand of disjoint. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of disjoint. (of cts:region)ServerExpression disjoint(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:disjoint server function.
region1
 The first geospatial region to compare.
This region is the left operand of disjoint. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of disjoint. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression disjoint(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:disjoint server function.
region1
 The first geospatial region to compare.
This region is the left operand of disjoint. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of disjoint. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression distance(ServerExpression p1, ServerExpression p2)
Provides a client interface to the geo:distance server function.
ServerExpression distance(ServerExpression p1, ServerExpression p2, java.lang.String options)
Provides a client interface to the geo:distance server function.
p1
 The first point. (of cts:point)p2
 The second point. (of cts:point)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance
and the radii of circles in the specified units. Allowed values:
miles (default), km, feet, meters. (of xs:string)ServerExpression distance(ServerExpression p1, ServerExpression p2, ServerExpression options)
Provides a client interface to the geo:distance server function.
p1
 The first point. (of cts:point)p2
 The second point. (of cts:point)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance
and the radii of circles in the specified units. Allowed values:
miles (default), km, feet, meters. (of xs:string)ServerExpression distanceConvert(ServerExpression distance, java.lang.String unit1, java.lang.String unit2)
Provides a client interface to the geo:distanceconvert server function.
ServerExpression distanceConvert(ServerExpression distance, ServerExpression unit1, ServerExpression unit2)
Provides a client interface to the geo:distanceconvert server function.
ServerExpression ellipsePolygon(ServerExpression center, double semiMajorAxis, double semiMinorAxis, double azimuth, double arcTolerance)
Provides a client interface to the geo:ellipsepolygon server function.
center
 Center of the ellipse. (of cts:point)semiMajorAxis
 The semi major axis of the
ellipse. The units are governed by the units option. (of xs:double)semiMinorAxis
 The semi minor axis of the
ellipse. The units are governed by the units option. (of xs:double)azimuth
 The azimuth. (of xs:double)arcTolerance
 How far the approximation can be
from the actual ellipse, specified in the same units as the units
option. Arctolerance should be greater than the value of the
tolerance option, which defaults to 0.05km (0.3106856 miles). (of
xs:double)ServerExpression ellipsePolygon(ServerExpression center, ServerExpression semiMajorAxis, ServerExpression semiMinorAxis, ServerExpression azimuth, ServerExpression arcTolerance)
Provides a client interface to the geo:ellipsepolygon server function.
center
 Center of the ellipse. (of cts:point)semiMajorAxis
 The semi major axis of the
ellipse. The units are governed by the units option. (of xs:double)semiMinorAxis
 The semi minor axis of the
ellipse. The units are governed by the units option. (of xs:double)azimuth
 The azimuth. (of xs:double)arcTolerance
 How far the approximation can be
from the actual ellipse, specified in the same units as the units
option. Arctolerance should be greater than the value of the
tolerance option, which defaults to 0.05km (0.3106856 miles). (of
xs:double)ServerExpression ellipsePolygon(ServerExpression center, double semiMajorAxis, double semiMinorAxis, double azimuth, double arcTolerance, java.lang.String options)
Provides a client interface to the geo:ellipsepolygon server function.
center
 Center of the ellipse. (of cts:point)semiMajorAxis
 The semi major axis of the
ellipse. The units are governed by the units option. (of xs:double)semiMinorAxis
 The semi minor axis of the
ellipse. The units are governed by the units option. (of xs:double)azimuth
 The azimuth. (of xs:double)arcTolerance
 How far the approximation can be
from the actual ellipse, specified in the same units as the units
option. Arctolerance should be greater than the value of the
tolerance option, which defaults to 0.05km (0.3106856 miles). (of
xs:double)options
 Options with which to configure the
behavior. Options include: "coordinatesystem=value" Use the given
coordinate system. Valid values are wgs84, wgs84/double, etrs89,
etrs89/double, raw and raw/double. Defaults to the governing
coordinating system. "precision=value" Use the coordinate system at
the given precision. Allowed values: float and double. Defaults to
the precision of the governing coordinate system. "units=value"
Measure distance, the axes of the ellipse, and tolerance in the
specified units. Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. (of xs:string)ServerExpression ellipsePolygon(ServerExpression center, ServerExpression semiMajorAxis, ServerExpression semiMinorAxis, ServerExpression azimuth, ServerExpression arcTolerance, ServerExpression options)
Provides a client interface to the geo:ellipsepolygon server function.
center
 Center of the ellipse. (of cts:point)semiMajorAxis
 The semi major axis of the
ellipse. The units are governed by the units option. (of xs:double)semiMinorAxis
 The semi minor axis of the
ellipse. The units are governed by the units option. (of xs:double)azimuth
 The azimuth. (of xs:double)arcTolerance
 How far the approximation can be
from the actual ellipse, specified in the same units as the units
option. Arctolerance should be greater than the value of the
tolerance option, which defaults to 0.05km (0.3106856 miles). (of
xs:double)options
 Options with which to configure the
behavior. Options include: "coordinatesystem=value" Use the given
coordinate system. Valid values are wgs84, wgs84/double, etrs89,
etrs89/double, raw and raw/double. Defaults to the governing
coordinating system. "precision=value" Use the coordinate system at
the given precision. Allowed values: float and double. Defaults to
the precision of the governing coordinate system. "units=value"
Measure distance, the axes of the ellipse, and tolerance in the
specified units. Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. (of xs:string)ServerExpression equals(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:equals server function.
region1
 The first geospatial region to compare.
This region is the left operand of equals. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of equals. (of cts:region)ServerExpression equals(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:equals server function.
region1
 The first geospatial region to compare.
This region is the left operand of equals. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of equals. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression equals(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:equals server function.
region1
 The first geospatial region to compare.
This region is the left operand of equals. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of equals. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression geohashDecode(java.lang.String hash)
Provides a client interface to the geo:geohashdecode server function.
ServerExpression geohashDecode(ServerExpression hash)
Provides a client interface to the geo:geohashdecode server function.
ServerExpression geohashDecodePoint(java.lang.String hash)
Provides a client interface to the geo:geohashdecodepoint server function.
ServerExpression geohashDecodePoint(ServerExpression hash)
Provides a client interface to the geo:geohashdecodepoint server function.
ServerExpression geohashEncode(ServerExpression region)
Provides a client interface to the geo:geohashencode server function.
region
 The region to encode. (of cts:region)ServerExpression geohashEncode(ServerExpression region, long geohashPrecision)
Provides a client interface to the geo:geohashencode server function.
region
 The region to encode. (of cts:region)geohashPrecision
 The desired precision (length
of the geohash). The precision should be between 1 and 12. If the
precision is less than 1, or unspecified, the default
geohashprecision of 6 is used. A geohashprecision greater than 12
is treated as the same as 12. In the worst case (at the equator) a
precision of 12 gives resolution of less than a centimeter. (of
xs:integer)ServerExpression geohashEncode(ServerExpression region, ServerExpression geohashPrecision)
Provides a client interface to the geo:geohashencode server function.
region
 The region to encode. (of cts:region)geohashPrecision
 The desired precision (length
of the geohash). The precision should be between 1 and 12. If the
precision is less than 1, or unspecified, the default
geohashprecision of 6 is used. A geohashprecision greater than 12
is treated as the same as 12. In the worst case (at the equator) a
precision of 12 gives resolution of less than a centimeter. (of
xs:integer)ServerExpression geohashEncode(ServerExpression region, long geohashPrecision, java.lang.String options)
Provides a client interface to the geo:geohashencode server function.
region
 The region to encode. (of cts:region)geohashPrecision
 The desired precision (length
of the geohash). The precision should be between 1 and 12. If the
precision is less than 1, or unspecified, the default
geohashprecision of 6 is used. A geohashprecision greater than 12
is treated as the same as 12. In the worst case (at the equator) a
precision of 12 gives resolution of less than a centimeter. (of
xs:integer)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. Geohashing is not allowed for nongeodetic
coordinate systems. Attempting to use this function with the raw or
raw/double coordinate system will result in an XDMPGEOHASHCOORD
error. "precision=string" Use the coordinate system at the given
precision. Allowed values: float (default) and double.
"units=value" Measure distance, radii of circles, and tolerance in
the specified units. Allowed values: miles (default), km, feet,
meters. "tolerance=distance" Tolerance is the largest allowable
variation in geometry calculations. If the distance between two
points is less than tolerance, then the two points are considered
equal. For the raw coordinate system, use the units of the
coordinates. For geographic coordinate systems, use the units
specified by the units option. geohashes=value Specify which
geohashes to return. Allowed values: all Return a complete set of
covering hashes for the region (boundary + interior). This is the
default behavior. boundary Return only geohashes that intersect
with the boundary of the region. interior Return only geohashes
completely contained in the interior of the region. exterior Return
all geohashes disjoint from the region. That is, all geohashes
completely contained in the exterior of the region. (of xs:string)ServerExpression geohashEncode(ServerExpression region, ServerExpression geohashPrecision, ServerExpression options)
Provides a client interface to the geo:geohashencode server function.
region
 The region to encode. (of cts:region)geohashPrecision
 The desired precision (length
of the geohash). The precision should be between 1 and 12. If the
precision is less than 1, or unspecified, the default
geohashprecision of 6 is used. A geohashprecision greater than 12
is treated as the same as 12. In the worst case (at the equator) a
precision of 12 gives resolution of less than a centimeter. (of
xs:integer)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. Geohashing is not allowed for nongeodetic
coordinate systems. Attempting to use this function with the raw or
raw/double coordinate system will result in an XDMPGEOHASHCOORD
error. "precision=string" Use the coordinate system at the given
precision. Allowed values: float (default) and double.
"units=value" Measure distance, radii of circles, and tolerance in
the specified units. Allowed values: miles (default), km, feet,
meters. "tolerance=distance" Tolerance is the largest allowable
variation in geometry calculations. If the distance between two
points is less than tolerance, then the two points are considered
equal. For the raw coordinate system, use the units of the
coordinates. For geographic coordinate systems, use the units
specified by the units option. geohashes=value Specify which
geohashes to return. Allowed values: all Return a complete set of
covering hashes for the region (boundary + interior). This is the
default behavior. boundary Return only geohashes that intersect
with the boundary of the region. interior Return only geohashes
completely contained in the interior of the region. exterior Return
all geohashes disjoint from the region. That is, all geohashes
completely contained in the exterior of the region. (of xs:string)ServerExpression geohashNeighbors(ServerExpression hash)
Provides a client interface to the geo:geohashneighbors server function.
ServerExpression geohashPrecisionDimensions(ServerExpression precision)
Provides a client interface to the geo:geohashprecisiondimensions server function.
precision
 The precision. This should be a number
between 0 and 12, as with geo:geohashencode. (of xs:integer)ServerExpression geohashSubhashes(ServerExpression hash)
Provides a client interface to the geo:geohashsubhashes server function.
ServerExpression geohashSubhashes(ServerExpression hash, java.lang.String which)
Provides a client interface to the geo:geohashsubhashes server function.
ServerExpression geohashSubhashes(ServerExpression hash, ServerExpression which)
Provides a client interface to the geo:geohashsubhashes server function.
ServerExpression interiorPoint(ServerExpression region)
Provides a client interface to the geo:interiorpoint server function.
region
 A cts region. (of cts:region)ServerExpression interiorPoint(ServerExpression region, java.lang.String options)
Provides a client interface to the geo:interiorpoint server function.
region
 A cts region. (of cts:region)options
 Options include:
"coordinatesystem=value" Use the given coordinate system. Valid
values are wgs84, wgs84/double, etrs89, etrs89/double, raw and
raw/double. Defaults to the governing coordinating system.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. Defaults to the precision of the
governing coordinate system. "units=value" Measure distance, radii
of circles, and tolerance in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. (of xs:string)ServerExpression interiorPoint(ServerExpression region, ServerExpression options)
Provides a client interface to the geo:interiorpoint server function.
region
 A cts region. (of cts:region)options
 Options include:
"coordinatesystem=value" Use the given coordinate system. Valid
values are wgs84, wgs84/double, etrs89, etrs89/double, raw and
raw/double. Defaults to the governing coordinating system.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. Defaults to the precision of the
governing coordinate system. "units=value" Measure distance, radii
of circles, and tolerance in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. (of xs:string)ServerExpression intersects(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:intersects server function.
region1
 The first geospatial region to compare.
This region is the left operand of intersects. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of intersects. (of cts:region)ServerExpression intersects(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:intersects server function.
region1
 The first geospatial region to compare.
This region is the left operand of intersects. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of intersects. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression intersects(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:intersects server function.
region1
 The first geospatial region to compare.
This region is the left operand of intersects. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of intersects. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression overlaps(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:overlaps server function.
region1
 The first geospatial region to compare.
This region is the left operand of overlaps. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of overlaps. (of cts:region)ServerExpression overlaps(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:overlaps server function.
region1
 The first geospatial region to compare.
This region is the left operand of overlaps. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of overlaps. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression overlaps(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:overlaps server function.
region1
 The first geospatial region to compare.
This region is the left operand of overlaps. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of overlaps. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)CtsRegionSeqExpr parseWkt(java.lang.String wkt)
Provides a client interface to the geo:parsewkt server function.
wkt
 A sequence of strings in WellKnown Text
format. (of xs:string)CtsRegionSeqExpr parseWkt(ServerExpression wkt)
Provides a client interface to the geo:parsewkt server function.
wkt
 A sequence of strings in WellKnown Text
format. (of xs:string)CtsRegionExpr regionApproximate(ServerExpression region, double threshold)
Provides a client interface to the geo:regionapproximate server function.
region
 A cts region. (of cts:region)threshold
 How close the approximation should be,
in the units specified by the units option. (of xs:double)CtsRegionExpr regionApproximate(ServerExpression region, ServerExpression threshold)
Provides a client interface to the geo:regionapproximate server function.
region
 A cts region. (of cts:region)threshold
 How close the approximation should be,
in the units specified by the units option. (of xs:double)CtsRegionExpr regionApproximate(ServerExpression region, double threshold, java.lang.String options)
Provides a client interface to the geo:regionapproximate server function.
region
 A cts region. (of cts:region)threshold
 How close the approximation should be,
in the units specified by the units option. (of xs:double)options
 Options include:
"coordinatesystem=value" Use the given coordinate system. Valid
values are wgs84, wgs84/double, etrs89, etrs89/double, raw and
raw/double. Defaults to the governing coordinating system.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. Defaults to the precision of the
governing coordinate system. "units=value" Measure distance, radii
of circles, and tolerance in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. Tolerance must be smaller
than the value of the threshold parameter. (of xs:string)CtsRegionExpr regionApproximate(ServerExpression region, ServerExpression threshold, ServerExpression options)
Provides a client interface to the geo:regionapproximate server function.
region
 A cts region. (of cts:region)threshold
 How close the approximation should be,
in the units specified by the units option. (of xs:double)options
 Options include:
"coordinatesystem=value" Use the given coordinate system. Valid
values are wgs84, wgs84/double, etrs89, etrs89/double, raw and
raw/double. Defaults to the governing coordinating system.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. Defaults to the precision of the
governing coordinate system. "units=value" Measure distance, radii
of circles, and tolerance in the specified units. Allowed values:
miles (default), km, feet, meters. "tolerance=distance" Tolerance
is the largest allowable variation in geometry calculations. If the
distance between two points is less than tolerance, then the two
points are considered equal. For the raw coordinate system, use the
units of the coordinates. For geographic coordinate systems, use
the units specified by the units option. Tolerance must be smaller
than the value of the threshold parameter. (of xs:string)CtsRegionExpr regionClean(ServerExpression region)
Provides a client interface to the geo:regionclean server function.
region
 A cts region. (of cts:region)CtsRegionExpr regionClean(ServerExpression region, java.lang.String options)
Provides a client interface to the geo:regionclean server function.
region
 A cts region. (of cts:region)options
 The tolerance, units, coordinate system.
Options include: "coordinatesystem=value" Use the given coordinate
system. Valid values are wgs84, wgs84/double, etrs89,
etrs89/double, raw and raw/double. Defaults to the governing
coordinating system. "precision=value" Use the coordinate system at
the given precision. Allowed values: float and double. Defaults to
the precision of the governing coordinate system. "units=value"
Measure distance, radii of circles, and tolerance in the specified
units. Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. (of xs:string)CtsRegionExpr regionClean(ServerExpression region, ServerExpression options)
Provides a client interface to the geo:regionclean server function.
region
 A cts region. (of cts:region)options
 The tolerance, units, coordinate system.
Options include: "coordinatesystem=value" Use the given coordinate
system. Valid values are wgs84, wgs84/double, etrs89,
etrs89/double, raw and raw/double. Defaults to the governing
coordinating system. "precision=value" Use the coordinate system at
the given precision. Allowed values: float and double. Defaults to
the precision of the governing coordinate system. "units=value"
Measure distance, radii of circles, and tolerance in the specified
units. Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. (of xs:string)ServerExpression regionContains(ServerExpression target, ServerExpression region)
Provides a client interface to the geo:regioncontains server function.
target
 A geographic region. (of cts:region)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if target contains any of the regions. (of
cts:region)ServerExpression regionContains(ServerExpression target, ServerExpression region, java.lang.String options)
Provides a client interface to the geo:regioncontains server function.
target
 A geographic region. (of cts:region)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if target contains any of the regions. (of
cts:region)options
 Options for the operation. The default
is (). Options include: Options include: "coordinatesystem=string"
Use the given coordinate system. Valid values are: wgs84The WGS84
coordinate system with degrees as the angular unit.
wgs84/radiansThe WGS84 coordinate system with radians as the
angular unit. wgs84/doubleThe WGS84 coordinate system at double
precision with degrees as the angular unit. wgs84/radians/doubleThe
WGS84 coordinate system at double precision with radians as the
angular unit. etrs89The ETRS89 coordinate system. etrs89/doubleThe
ETRS89 coordinate system at double precision. rawThe raw (unmapped)
coordinate system. raw/doubleThe raw coordinate system at double
precision. "precision=value" Use the coordinate system at the given
precision. Allowed values: float and double. "units=value" Measure
distance, radii of circles, and tolerance in the specified units.
Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. "boundariesincluded" Points on boxes', circles', and
regions' boundaries are counted as matching. This is the default.
"boundariesexcluded" Points on boxes', circles', and regions'
boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression regionContains(ServerExpression target, ServerExpression region, ServerExpression options)
Provides a client interface to the geo:regioncontains server function.
target
 A geographic region. (of cts:region)region
 One or more geographic regions (boxes,
circles, polygons, or points). Where multiple regions are
specified, return true if target contains any of the regions. (of
cts:region)options
 Options for the operation. The default
is (). Options include: Options include: "coordinatesystem=string"
Use the given coordinate system. Valid values are: wgs84The WGS84
coordinate system with degrees as the angular unit.
wgs84/radiansThe WGS84 coordinate system with radians as the
angular unit. wgs84/doubleThe WGS84 coordinate system at double
precision with degrees as the angular unit. wgs84/radians/doubleThe
WGS84 coordinate system at double precision with radians as the
angular unit. etrs89The ETRS89 coordinate system. etrs89/doubleThe
ETRS89 coordinate system at double precision. rawThe raw (unmapped)
coordinate system. raw/doubleThe raw coordinate system at double
precision. "precision=value" Use the coordinate system at the given
precision. Allowed values: float and double. "units=value" Measure
distance, radii of circles, and tolerance in the specified units.
Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. "boundariesincluded" Points on boxes', circles', and
regions' boundaries are counted as matching. This is the default.
"boundariesexcluded" Points on boxes', circles', and regions'
boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression regionDe9im(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:regionde9im server function.
region1
 The first geospatial region to compare.
(of cts:region)region2
 The second geospatial region to compare.
(of cts:region)ServerExpression regionDe9im(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:regionde9im server function.
region1
 The first geospatial region to compare.
(of cts:region)region2
 The second geospatial region to compare.
(of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression regionDe9im(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:regionde9im server function.
region1
 The first geospatial region to compare.
(of cts:region)region2
 The second geospatial region to compare.
(of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression regionIntersects(ServerExpression target, ServerExpression region)
Provides a client interface to the geo:regionintersects server function.
target
 A geographic region (box, circle,
polygon, or point). (of cts:region)region
 One or more geographic regions. Where
multiple regions are specified, return true if any region
intersects the target region. (of cts:region)ServerExpression regionIntersects(ServerExpression target, ServerExpression region, java.lang.String options)
Provides a client interface to the geo:regionintersects server function.
target
 A geographic region (box, circle,
polygon, or point). (of cts:region)region
 One or more geographic regions. Where
multiple regions are specified, return true if any region
intersects the target region. (of cts:region)options
 Options for the operation. The default
is (). Options include: Options include: "coordinatesystem=string"
Use the given coordinate system. Valid values are: wgs84The WGS84
coordinate system with degrees as the angular unit.
wgs84/radiansThe WGS84 coordinate system with radians as the
angular unit. wgs84/doubleThe WGS84 coordinate system at double
precision with degrees as the angular unit. wgs84/radians/doubleThe
WGS84 coordinate system at double precision with radians as the
angular unit. etrs89The ETRS89 coordinate system. etrs89/doubleThe
ETRS89 coordinate system at double precision. rawThe raw (unmapped)
coordinate system. raw/doubleThe raw coordinate system at double
precision. "precision=value" Use the coordinate system at the given
precision. Allowed values: float and double. "units=value" Measure
distance, radii of circles, and tolerance in the specified units.
Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. "boundariesincluded" Points on regions' boundaries are
counted as matching. This is the default. "boundariesexcluded"
Points on regions' boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression regionIntersects(ServerExpression target, ServerExpression region, ServerExpression options)
Provides a client interface to the geo:regionintersects server function.
target
 A geographic region (box, circle,
polygon, or point). (of cts:region)region
 One or more geographic regions. Where
multiple regions are specified, return true if any region
intersects the target region. (of cts:region)options
 Options for the operation. The default
is (). Options include: Options include: "coordinatesystem=string"
Use the given coordinate system. Valid values are: wgs84The WGS84
coordinate system with degrees as the angular unit.
wgs84/radiansThe WGS84 coordinate system with radians as the
angular unit. wgs84/doubleThe WGS84 coordinate system at double
precision with degrees as the angular unit. wgs84/radians/doubleThe
WGS84 coordinate system at double precision with radians as the
angular unit. etrs89The ETRS89 coordinate system. etrs89/doubleThe
ETRS89 coordinate system at double precision. rawThe raw (unmapped)
coordinate system. raw/doubleThe raw coordinate system at double
precision. "precision=value" Use the coordinate system at the given
precision. Allowed values: float and double. "units=value" Measure
distance, radii of circles, and tolerance in the specified units.
Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. "boundariesincluded" Points on regions' boundaries are
counted as matching. This is the default. "boundariesexcluded"
Points on regions' boundaries are not counted as matching.
"boundarieslatitudeexcluded" Points on boxes' latitude boundaries
are not counted as matching. "boundarieslongitudeexcluded" Points
on boxes' longitude boundaries are not counted as matching.
"boundariessouthexcluded" Points on the boxes' southern
boundaries are not counted as matching. "boundarieswestexcluded"
Points on the boxes' western boundaries are not counted as
matching. "boundariesnorthexcluded" Points on the boxes' northern
boundaries are not counted as matching. "boundarieseastexcluded"
Points on the boxes' eastern boundaries are not counted as
matching. "boundariescircleexcluded" Points on circles' boundary
are not counted as matching. "boundariesendpointsexcluded" Points
on linestrings' boundary (the endpoints) are not counted as
matching. (of xs:string)ServerExpression regionRelate(ServerExpression region1, java.lang.String operation, ServerExpression region2)
Provides a client interface to the geo:regionrelate server function.
region1
 The first geospatial region to compare.
This region is the left operand of $operation. (of cts:region)operation
 The operation to apply between the
region specified in the $region1 and $region2 parameters. Allowed
values: contains, coveredby, covers, crosses, disjoint, equals,
intersects, overlaps, touches, within. See the Usage Notes for
details. (of xs:string)region2
 The second geospatial region to compare.
This region is the right operand of $operation. (of cts:region)ServerExpression regionRelate(ServerExpression region1, ServerExpression operation, ServerExpression region2)
Provides a client interface to the geo:regionrelate server function.
region1
 The first geospatial region to compare.
This region is the left operand of $operation. (of cts:region)operation
 The operation to apply between the
region specified in the $region1 and $region2 parameters. Allowed
values: contains, coveredby, covers, crosses, disjoint, equals,
intersects, overlaps, touches, within. See the Usage Notes for
details. (of xs:string)region2
 The second geospatial region to compare.
This region is the right operand of $operation. (of cts:region)ServerExpression regionRelate(ServerExpression region1, java.lang.String operation, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:regionrelate server function.
region1
 The first geospatial region to compare.
This region is the left operand of $operation. (of cts:region)operation
 The operation to apply between the
region specified in the $region1 and $region2 parameters. Allowed
values: contains, coveredby, covers, crosses, disjoint, equals,
intersects, overlaps, touches, within. See the Usage Notes for
details. (of xs:string)region2
 The second geospatial region to compare.
This region is the right operand of $operation. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression regionRelate(ServerExpression region1, ServerExpression operation, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:regionrelate server function.
region1
 The first geospatial region to compare.
This region is the left operand of $operation. (of cts:region)operation
 The operation to apply between the
region specified in the $region1 and $region2 parameters. Allowed
values: contains, coveredby, covers, crosses, disjoint, equals,
intersects, overlaps, touches, within. See the Usage Notes for
details. (of xs:string)region2
 The second geospatial region to compare.
This region is the right operand of $operation. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)CtsRegionExpr removeDuplicateVertices(ServerExpression region)
Provides a client interface to the geo:removeduplicatevertices server function.
region
 A cts region. (of cts:region)CtsRegionExpr removeDuplicateVertices(ServerExpression region, java.lang.String options)
Provides a client interface to the geo:removeduplicatevertices server function.
region
 A cts region. (of cts:region)options
 The tolerance, units, coordinate system.
Options include: "coordinatesystem=value" Use the given coordinate
system. Valid values are wgs84, wgs84/double, etrs89,
etrs89/double, raw and raw/double. Defaults to the governing
coordinating system. "precision=value" Use the coordinate system at
the given precision. Allowed values: float and double. Defaults to
the precision of the governing coordinate system. "units=value"
Measure distance, radii of circles, and tolerance in the specified
units. Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. (of xs:string)CtsRegionExpr removeDuplicateVertices(ServerExpression region, ServerExpression options)
Provides a client interface to the geo:removeduplicatevertices server function.
region
 A cts region. (of cts:region)options
 The tolerance, units, coordinate system.
Options include: "coordinatesystem=value" Use the given coordinate
system. Valid values are wgs84, wgs84/double, etrs89,
etrs89/double, raw and raw/double. Defaults to the governing
coordinating system. "precision=value" Use the coordinate system at
the given precision. Allowed values: float and double. Defaults to
the precision of the governing coordinate system. "units=value"
Measure distance, radii of circles, and tolerance in the specified
units. Allowed values: miles (default), km, feet, meters.
"tolerance=distance" Tolerance is the largest allowable variation
in geometry calculations. If the distance between two points is
less than tolerance, then the two points are considered equal. For
the raw coordinate system, use the units of the coordinates. For
geographic coordinate systems, use the units specified by the units
option. (of xs:string)ServerExpression shortestDistance(ServerExpression p1, ServerExpression region)
Provides a client interface to the geo:shortestdistance server function.
p1
 The first point. (of cts:point)region
 A region such as a circle, box, polygon,
linestring, or complexpolygon. For compatibility with previous
versions, a sequence of points is interpreted as a sequence of arcs
(defined pairwise) and the distance returned is the shortest
distance to one of those points. If the first parameter is a point
within the region specified in this parameter, then this function
returns 0. If the point specified in the first parameter in not in
the region specified in this parameter, then this function returns
the shortest distance to the boundary of the region. (of cts:region)ServerExpression shortestDistance(ServerExpression p1, ServerExpression region, java.lang.String options)
Provides a client interface to the geo:shortestdistance server function.
p1
 The first point. (of cts:point)region
 A region such as a circle, box, polygon,
linestring, or complexpolygon. For compatibility with previous
versions, a sequence of points is interpreted as a sequence of arcs
(defined pairwise) and the distance returned is the shortest
distance to one of those points. If the first parameter is a point
within the region specified in this parameter, then this function
returns 0. If the point specified in the first parameter in not in
the region specified in this parameter, then this function returns
the shortest distance to the boundary of the region. (of cts:region)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"units=value" Measure distance and the radii of circles in the
specified units. Allowed values: miles (default), km, feet, meters.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. (of xs:string)ServerExpression shortestDistance(ServerExpression p1, ServerExpression region, ServerExpression options)
Provides a client interface to the geo:shortestdistance server function.
p1
 The first point. (of cts:point)region
 A region such as a circle, box, polygon,
linestring, or complexpolygon. For compatibility with previous
versions, a sequence of points is interpreted as a sequence of arcs
(defined pairwise) and the distance returned is the shortest
distance to one of those points. If the first parameter is a point
within the region specified in this parameter, then this function
returns 0. If the point specified in the first parameter in not in
the region specified in this parameter, then this function returns
the shortest distance to the boundary of the region. (of cts:region)options
 Options for the operation. The default
is (). Options include: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"units=value" Measure distance and the radii of circles in the
specified units. Allowed values: miles (default), km, feet, meters.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. (of xs:string)ServerExpression toWkt(ServerExpression wkt)
Provides a client interface to the geo:towkt server function.
wkt
 A sequence of geospatial regions. (of
cts:region)ServerExpression touches(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:touches server function.
region1
 The first geospatial region to compare.
This region is the left operand of touches. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of touches. (of cts:region)ServerExpression touches(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:touches server function.
region1
 The first geospatial region to compare.
This region is the left operand of touches. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of touches. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression touches(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:touches server function.
region1
 The first geospatial region to compare.
This region is the left operand of touches. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of touches. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression validateWkt(ServerExpression wkt)
Provides a client interface to the geo:validatewkt server function.
wkt
 A string to validate. (of xs:string)ServerExpression within(ServerExpression region1, ServerExpression region2)
Provides a client interface to the geo:within server function.
region1
 The first geospatial region to compare.
This region is the left operand of within. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of within. (of cts:region)ServerExpression within(ServerExpression region1, ServerExpression region2, java.lang.String options)
Provides a client interface to the geo:within server function.
region1
 The first geospatial region to compare.
This region is the left operand of within. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of within. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)ServerExpression within(ServerExpression region1, ServerExpression region2, ServerExpression options)
Provides a client interface to the geo:within server function.
region1
 The first geospatial region to compare.
This region is the left operand of within. (of cts:region)region2
 The second geospatial region to compare.
This region is the right operand of within. (of cts:region)options
 Options to this operation. The default
is (). Available options: "coordinatesystem=string" Use the given
coordinate system. Valid values are: wgs84The WGS84 coordinate
system with degrees as the angular unit. wgs84/radiansThe WGS84
coordinate system with radians as the angular unit. wgs84/doubleThe
WGS84 coordinate system at double precision with degrees as the
angular unit. wgs84/radians/doubleThe WGS84 coordinate system at
double precision with radians as the angular unit. etrs89The ETRS89
coordinate system. etrs89/doubleThe ETRS89 coordinate system at
double precision. rawThe raw (unmapped) coordinate system.
raw/doubleThe raw coordinate system at double precision.
"precision=value" Use the coordinate system at the given precision.
Allowed values: float and double. "units=value" Measure distance,
radii of circles, and tolerance in the specified units. Allowed
values: miles (default), km, feet, meters. "tolerance=distance"
Tolerance is the largest allowable variation in geometry
calculations. If the distance between two points is less than
tolerance, then the two points are considered equal. For the raw
coordinate system, use the units of the coordinates. For geographic
coordinate systems, use the units specified by the units option.
(of xs:string)Copyright © 2024 MarkLogic Corporation. All Rights Reserved.